DictionaryBase.GetEnumerator Método
Definição
Importante
Algumas informações se referem a produtos de pré-lançamento que podem ser substancialmente modificados antes do lançamento. A Microsoft não oferece garantias, expressas ou implícitas, das informações aqui fornecidas.
Retorna um IDictionaryEnumerator que itera por meio da DictionaryBase instância.
public:
virtual System::Collections::IDictionaryEnumerator ^ GetEnumerator();public System.Collections.IDictionaryEnumerator GetEnumerator();abstract member GetEnumerator : unit -> System.Collections.IDictionaryEnumerator
override this.GetEnumerator : unit -> System.Collections.IDictionaryEnumeratorPublic Function GetEnumerator () As IDictionaryEnumeratorRetornos
Um IDictionaryEnumerator para a DictionaryBase instância.
Implementações
Exemplos
O exemplo de código a seguir implementa a DictionaryBase classe e usa essa implementação para criar um dicionário de String chaves e valores que tenham um Length de 5 caracteres ou menos.
using System;
using System.Collections;
public class ShortStringDictionary : DictionaryBase {
public String this[ String key ] {
get {
return( (String) Dictionary[key] );
}
set {
Dictionary[key] = value;
}
}
public ICollection Keys {
get {
return( Dictionary.Keys );
}
}
public ICollection Values {
get {
return( Dictionary.Values );
}
}
public void Add( String key, String value ) {
Dictionary.Add( key, value );
}
public bool Contains( String key ) {
return( Dictionary.Contains( key ) );
}
public void Remove( String key ) {
Dictionary.Remove( key );
}
protected override void OnInsert( Object key, Object value ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
if ( value.GetType() != typeof(System.String) )
{
throw new ArgumentException( "value must be of type String.", "value" );
}
else {
String strValue = (String) value;
if ( strValue.Length > 5 )
throw new ArgumentException( "value must be no more than 5 characters in length.", "value" );
}
}
protected override void OnRemove( Object key, Object value ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
}
protected override void OnSet( Object key, Object oldValue, Object newValue ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
if ( newValue.GetType() != typeof(System.String) )
{
throw new ArgumentException( "newValue must be of type String.", "newValue" );
}
else {
String strValue = (String) newValue;
if ( strValue.Length > 5 )
throw new ArgumentException( "newValue must be no more than 5 characters in length.", "newValue" );
}
}
protected override void OnValidate( Object key, Object value ) {
if ( key.GetType() != typeof(System.String) )
{
throw new ArgumentException( "key must be of type String.", "key" );
}
else {
String strKey = (String) key;
if ( strKey.Length > 5 )
throw new ArgumentException( "key must be no more than 5 characters in length.", "key" );
}
if ( value.GetType() != typeof(System.String) )
{
throw new ArgumentException( "value must be of type String.", "value" );
}
else {
String strValue = (String) value;
if ( strValue.Length > 5 )
throw new ArgumentException( "value must be no more than 5 characters in length.", "value" );
}
}
}
public class SamplesDictionaryBase {
public static void Main() {
// Creates and initializes a new DictionaryBase.
ShortStringDictionary mySSC = new ShortStringDictionary();
// Adds elements to the collection.
mySSC.Add( "One", "a" );
mySSC.Add( "Two", "ab" );
mySSC.Add( "Three", "abc" );
mySSC.Add( "Four", "abcd" );
mySSC.Add( "Five", "abcde" );
// Display the contents of the collection using foreach. This is the preferred method.
Console.WriteLine( "Contents of the collection (using foreach):" );
PrintKeysAndValues1( mySSC );
// Display the contents of the collection using the enumerator.
Console.WriteLine( "Contents of the collection (using enumerator):" );
PrintKeysAndValues2( mySSC );
// Display the contents of the collection using the Keys property and the Item property.
Console.WriteLine( "Initial contents of the collection (using Keys and Item):" );
PrintKeysAndValues3( mySSC );
// Tries to add a value that is too long.
try {
mySSC.Add( "Ten", "abcdefghij" );
}
catch ( ArgumentException e ) {
Console.WriteLine( e.ToString() );
}
// Tries to add a key that is too long.
try {
mySSC.Add( "Eleven", "ijk" );
}
catch ( ArgumentException e ) {
Console.WriteLine( e.ToString() );
}
Console.WriteLine();
// Searches the collection with Contains.
Console.WriteLine( "Contains \"Three\": {0}", mySSC.Contains( "Three" ) );
Console.WriteLine( "Contains \"Twelve\": {0}", mySSC.Contains( "Twelve" ) );
Console.WriteLine();
// Removes an element from the collection.
mySSC.Remove( "Two" );
// Displays the contents of the collection.
Console.WriteLine( "After removing \"Two\":" );
PrintKeysAndValues1( mySSC );
}
// Uses the foreach statement which hides the complexity of the enumerator.
// NOTE: The foreach statement is the preferred way of enumerating the contents of a collection.
public static void PrintKeysAndValues1( ShortStringDictionary myCol ) {
foreach ( DictionaryEntry myDE in myCol )
Console.WriteLine( " {0,-5} : {1}", myDE.Key, myDE.Value );
Console.WriteLine();
}
// Uses the enumerator.
// NOTE: The foreach statement is the preferred way of enumerating the contents of a collection.
public static void PrintKeysAndValues2( ShortStringDictionary myCol ) {
DictionaryEntry myDE;
System.Collections.IEnumerator myEnumerator = myCol.GetEnumerator();
while ( myEnumerator.MoveNext() )
if ( myEnumerator.Current != null ) {
myDE = (DictionaryEntry) myEnumerator.Current;
Console.WriteLine( " {0,-5} : {1}", myDE.Key, myDE.Value );
}
Console.WriteLine();
}
// Uses the Keys property and the Item property.
public static void PrintKeysAndValues3( ShortStringDictionary myCol ) {
ICollection myKeys = myCol.Keys;
foreach ( String k in myKeys )
Console.WriteLine( " {0,-5} : {1}", k, myCol[k] );
Console.WriteLine();
}
}
/*
This code produces the following output.
Contents of the collection (using foreach):
Three : abc
Five : abcde
Two : ab
One : a
Four : abcd
Contents of the collection (using enumerator):
Three : abc
Five : abcde
Two : ab
One : a
Four : abcd
Initial contents of the collection (using Keys and Item):
Three : abc
Five : abcde
Two : ab
One : a
Four : abcd
System.ArgumentException: value must be no more than 5 characters in length.
Parameter name: value
at ShortStringDictionary.OnValidate(Object key, Object value)
at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
at SamplesDictionaryBase.Main()
System.ArgumentException: key must be no more than 5 characters in length.
Parameter name: key
at ShortStringDictionary.OnValidate(Object key, Object value)
at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
at SamplesDictionaryBase.Main()
Contains "Three": True
Contains "Twelve": False
After removing "Two":
Three : abc
Five : abcde
One : a
Four : abcd
*/
Imports System.Collections
Public Class ShortStringDictionary
Inherits DictionaryBase
Default Public Property Item(key As String) As String
Get
Return CType(Dictionary(key), String)
End Get
Set
Dictionary(key) = value
End Set
End Property
Public ReadOnly Property Keys() As ICollection
Get
Return Dictionary.Keys
End Get
End Property
Public ReadOnly Property Values() As ICollection
Get
Return Dictionary.Values
End Get
End Property
Public Sub Add(key As String, value As String)
Dictionary.Add(key, value)
End Sub
Public Function Contains(key As String) As Boolean
Return Dictionary.Contains(key)
End Function 'Contains
Public Sub Remove(key As String)
Dictionary.Remove(key)
End Sub
Protected Overrides Sub OnInsert(key As Object, value As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
If Not GetType(System.String).IsAssignableFrom(value.GetType()) Then
Throw New ArgumentException("value must be of type String.", "value")
Else
Dim strValue As String = CType(value, String)
If strValue.Length > 5 Then
Throw New ArgumentException("value must be no more than 5 characters in length.", "value")
End If
End If
End Sub
Protected Overrides Sub OnRemove(key As Object, value As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
End Sub
Protected Overrides Sub OnSet(key As Object, oldValue As Object, newValue As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
If Not GetType(System.String).IsAssignableFrom(newValue.GetType()) Then
Throw New ArgumentException("newValue must be of type String.", "newValue")
Else
Dim strValue As String = CType(newValue, String)
If strValue.Length > 5 Then
Throw New ArgumentException("newValue must be no more than 5 characters in length.", "newValue")
End If
End If
End Sub
Protected Overrides Sub OnValidate(key As Object, value As Object)
If Not GetType(System.String).IsAssignableFrom(key.GetType()) Then
Throw New ArgumentException("key must be of type String.", "key")
Else
Dim strKey As String = CType(key, String)
If strKey.Length > 5 Then
Throw New ArgumentException("key must be no more than 5 characters in length.", "key")
End If
End If
If Not GetType(System.String).IsAssignableFrom(value.GetType()) Then
Throw New ArgumentException("value must be of type String.", "value")
Else
Dim strValue As String = CType(value, String)
If strValue.Length > 5 Then
Throw New ArgumentException("value must be no more than 5 characters in length.", "value")
End If
End If
End Sub
End Class
Public Class SamplesDictionaryBase
Public Shared Sub Main()
' Creates and initializes a new DictionaryBase.
Dim mySSC As New ShortStringDictionary()
' Adds elements to the collection.
mySSC.Add("One", "a")
mySSC.Add("Two", "ab")
mySSC.Add("Three", "abc")
mySSC.Add("Four", "abcd")
mySSC.Add("Five", "abcde")
' Display the contents of the collection using For Each. This is the preferred method.
Console.WriteLine("Contents of the collection (using For Each):")
PrintKeysAndValues1(mySSC)
' Display the contents of the collection using the enumerator.
Console.WriteLine("Contents of the collection (using enumerator):")
PrintKeysAndValues2(mySSC)
' Display the contents of the collection using the Keys property and the Item property.
Console.WriteLine("Initial contents of the collection (using Keys and Item):")
PrintKeysAndValues3(mySSC)
' Tries to add a value that is too long.
Try
mySSC.Add("Ten", "abcdefghij")
Catch e As ArgumentException
Console.WriteLine(e.ToString())
End Try
' Tries to add a key that is too long.
Try
mySSC.Add("Eleven", "ijk")
Catch e As ArgumentException
Console.WriteLine(e.ToString())
End Try
Console.WriteLine()
' Searches the collection with Contains.
Console.WriteLine("Contains ""Three"": {0}", mySSC.Contains("Three"))
Console.WriteLine("Contains ""Twelve"": {0}", mySSC.Contains("Twelve"))
Console.WriteLine()
' Removes an element from the collection.
mySSC.Remove("Two")
' Displays the contents of the collection.
Console.WriteLine("After removing ""Two"":")
PrintKeysAndValues1(mySSC)
End Sub
' Uses the For Each statement which hides the complexity of the enumerator.
' NOTE: The For Each statement is the preferred way of enumerating the contents of a collection.
Public Shared Sub PrintKeysAndValues1(myCol As ShortStringDictionary)
Dim myDE As DictionaryEntry
For Each myDE In myCol
Console.WriteLine(" {0,-5} : {1}", myDE.Key, myDE.Value)
Next myDE
Console.WriteLine()
End Sub
' Uses the enumerator.
' NOTE: The For Each statement is the preferred way of enumerating the contents of a collection.
Public Shared Sub PrintKeysAndValues2(myCol As ShortStringDictionary)
Dim myDE As DictionaryEntry
Dim myEnumerator As System.Collections.IEnumerator = myCol.GetEnumerator()
While myEnumerator.MoveNext()
If Not (myEnumerator.Current Is Nothing) Then
myDE = CType(myEnumerator.Current, DictionaryEntry)
Console.WriteLine(" {0,-5} : {1}", myDE.Key, myDE.Value)
End If
End While
Console.WriteLine()
End Sub
' Uses the Keys property and the Item property.
Public Shared Sub PrintKeysAndValues3(myCol As ShortStringDictionary)
Dim myKeys As ICollection = myCol.Keys
Dim k As String
For Each k In myKeys
Console.WriteLine(" {0,-5} : {1}", k, myCol(k))
Next k
Console.WriteLine()
End Sub
End Class
'This code produces the following output.
'
'Contents of the collection (using For Each):
' Three : abc
' Five : abcde
' Two : ab
' One : a
' Four : abcd
'
'Contents of the collection (using enumerator):
' Three : abc
' Five : abcde
' Two : ab
' One : a
' Four : abcd
'
'Initial contents of the collection (using Keys and Item):
' Three : abc
' Five : abcde
' Two : ab
' One : a
' Four : abcd
'
'System.ArgumentException: value must be no more than 5 characters in length.
'Parameter name: value
' at ShortStringDictionary.OnValidate(Object key, Object value)
' at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
' at SamplesDictionaryBase.Main()
'System.ArgumentException: key must be no more than 5 characters in length.
'Parameter name: key
' at ShortStringDictionary.OnValidate(Object key, Object value)
' at System.Collections.DictionaryBase.System.Collections.IDictionary.Add(Object key, Object value)
' at SamplesDictionaryBase.Main()
'
'Contains "Three": True
'Contains "Twelve": False
'
'After removing "Two":
' Three : abc
' Five : abcde
' One : a
' Four : abcd
Comentários
A instrução foreach da linguagem C# (for each em Visual Basic) oculta a complexidade dos enumeradores. Portanto, o uso foreach é recomendado, em vez de manipular diretamente o enumerador.
Os enumeradores podem ser usados para ler os dados na coleção, mas não podem ser usados para modificar a coleção subjacente.
Inicialmente, o enumerador é posicionado antes do primeiro elemento da coleção. Reset também traz o enumerador de volta para essa posição. Nessa posição, Current é indefinido. Portanto, você deve chamar MoveNext para avançar o enumerador para o primeiro elemento da coleção antes de ler o valor de Current.
Current retorna o mesmo objeto até ou MoveNextReset é chamado. MoveNext define Current para o próximo elemento.
Se MoveNext passar o final da coleção, o enumerador será posicionado após o último elemento na coleção e MoveNext retornará false. Quando o enumerador está nessa posição, chamadas subsequentes para MoveNext também retornar false. Se a última chamada a ser MoveNext retornada false, Current será indefinida. Para definir Current como o primeiro elemento da coleção novamente, você pode chamar Reset seguido por MoveNext.
Um enumerador permanece válido enquanto a coleção permanecer inalterada. Se forem feitas alterações na coleção, como adicionar, modificar ou excluir elementos, o enumerador será invalidado irrecuperavelmente e seu comportamento será indefinido.
O enumerador não tem acesso exclusivo à coleção; portanto, enumerar por meio de uma coleção não é intrinsecamente um procedimento thread-safe. Para garantir a segurança do thread durante a enumeração, você pode bloquear a coleção durante toda a enumeração. Para permitir que a coleção seja acessada por vários threads para leitura e gravação, você deve implementar sua própria sincronização.
Esse método é uma O(1) operação.